Skip to content
PM-727V Milling Machine

PM-727V Milling Machine

$2,899.00 - $3,599.00
$3,599.00
$2,899.00 - $3,599.00
$3,599.00
  • Variable Spindle Speeds, still with 6 geared steps, with all Hardened and Ground Steel gears in head, for much heavier cutting capability, and the variable speed allows you to perfectly match the cut. The 6 step gearing allows for more power at lower speeds, and is designed so you not sacrifice power at the lower speeds 
  • Compact Size for smaller work shops, but has more weight and power to remove material when needed
  • Table Graduations in .001" on X and Y with a true Inch Pitch Leadscrew, leads to easier operation when tolerances matter
  • Main Column is attached to the base with 4 bolts from the top, with a very wide mounting surface for much more rigidity over other models in this size range
  • Only Requires Standard 120V Single Phase Circuit, so it can be set up virtually anywhere, without needing additional circuits installed in your work shop
  • 3 Year Warranty, for added peace of mind
  • More Details
$249 Flat Rate Shipping in the 48 US States – Any accessories ordered with machine at the same time also ship free of charge! (Will automatically calculate at checkout)
Availability:
In stock
Availability:
Available on Backorder

PM-727V Main Features:

  • Variable Spindle Speeds, with a range from 40 to 3000 RPM, in 6 steps, allows you to perfectly match the speed for each job
  • Compact, Accurate, Economical Machine. Great for those who are looking for a
  • compact machine for a smaller work shop, yet need the ability to take heavier cuts
  • compared with other machines in this size range
  • Spindle is Supported by High Precision Tapered Roller Bearings
  • Mill Head May be Tilted ±90° (both left and right)
  • Precision Manual Fine Down Feed is standard
  • Adjustable Tapered Gibs for longer life
  • Positive Locks are standard for Table, Head, Quill, and Column
  • Easy Reading Dials Have Satin Chrome Finish, Graduated in 0.001"
  • Quill DRO is Standard, Accuracy of the Display 0.0005”, Selectable from mm/inch
  • Generous 18-1/4" Spindle To Table Max Distance for taller work
  • 8-1/2" Y Axis Travel, More than other machines in this class
  • This is the same mill as our PM-727M, only with the addition of the variable speed

PM-727V Standard Equipment

  • PM-727V Milling Machine, with Variable Speeds (6 Steps, plus speeds are variable in each range)
  • Way Covers
  • Drawbar
  • R8 Spindle Taper
  • Quill DRO
  • Chip Tray

PM-727V Optional Accessories

  • 3 Axis DRO - Note: if a 3 axis DRO is added to the machine, the 3rd axis of the DRO reads the HEAD up and down, Not the quill, so it is not doubling up on the measurement. If you add the 3 axis DRO, now both Z Axis movements are covered)

Optional DRO is now our PM LCD DRO as shown here:

Additional Specifications

  • Machine Base Dimensions (Cast Iron Base of machine, where it sits on the chip pan) Approx. 13-1/2”Wx21”D
  • Machine Base Dimension (Bolt Pattern) Approx. 11”Wx14-1/4”D

(These links below are 3rd party links, please do not contact us with questions or support as we are not affiliated with them. Contact the vendors directly for fit, pricing, availability, technical questions, etc. These links are only for your reference, all vendors are responsible for their own products below)

Quill Stop, Spindle Brake, Power Lift, Power Drawbar: Priest Tools PM-727MV aftermarket accessories

Main Specifications

Milling Machine Type Bench Type Mills
Headstock Tilt, Left to Right ±90°
Drawbar Thread
Diameter and Thread of drawbar
7/16-20
Spindle to Table Maximum
Maximum distance between spindle face and table, in inches.
18.25 in
PM Stand Height
Height of Precision Matthews Stand
32"
Spindle Bearing Type High Precision Tapered Roller Bearings
Table Dial Graduations 0.001"
Table Leadscrew Pitch
Number of Turns to move table 1"
10 TPI (0.100" per turn)

Travels

Mill X-Axis Travel
Maximum Left to Right travel distance along X-axis, in inches
15 in
Mill Y-Axis Travel
Maximum Front to Back travel distance along Y-axis, in inches
8.5 in
Mill Z-Axis Travel
Maximum Down-to-Up travel distance along Z-axis, in inches.
16 in
Quill Travel
Maximum extension of quill, in inches.
3 in

Table

X-Axis Table Length
X-axis table length, left-to-right, in inches.
27.5 in
Y-Axis Table Width
Y-axis table width, in inches.
7.13 in
T-slot size
Table T-Slot Size, in inches and metric
1/2", 12mm
Table Height Minimum
Table height from floor when fully lowered, in inches.
8.5 in

DRO Specifications

Power Requirements

Amperage
Minimum Breaker/Circuit/Outlet size required for product
20
Voltage
Voltage Rating
110V
Phase
Phase type of line power supply
1Φ
Power Frequency
Power line frequency compatibility, in Hz
60Hz
Horsepower
Power output of motor, in HP
1.5

Motor and Drive

Motor Type
Type of Motor
AC
Drive Type
Drive mechanism to transfer motor power to spindle
Gear Linkage
Speed Adjustment
How the speed is adjusted.
Dual Stepped and Variable
Spindle Minimum Speed
Minimum Speed of the Spindle, in RPM
40
Spindle Maximum Speed
Maximum Speed of the Spindle, in RPM
3,000

Cutting Capacities

Max Drilling Capacity 1.25"
Max End Milling Capacity 1"
Max Face Milling Capacity 3"

Unit Dimensions

Unit Length
Length of product in packaging, in inches
29 in
Unit Width
Width of product in packaging, in inches
28 in
Unit Height
Height of product in packaging, in inches
36 in
Unit Weight
Gross Weight of product in packaging, in lbs
515 lb

Shipping Information

Shipping Length
Length of longest dimension of shipping skid or shipping box, in inches.
34 in
Shipping Width
Width of shipping skid or 2nd longest dimension of shipping box, in inches.
34 in
Shipping Height
Height of shipment on skid, or 3rd longest dimension of shipping box, in inches.
42 in
Shipping Weight
Approximate shipping weight when crated, palletized, or boxed up and ready to ship, in lbs.
515 lb
Shipping Class
Parcel, Freight, Flat Rate shipping class
SC-F25LE
Liftgate Eligible
Is this product suitable or eligible for Liftgate Delivery Service?
Yes
HS Code
Harmonized System Code for customs and tariffs
8459.69
Country of Origin
Primary Country of Manufacturing Origin
China

Machine Footprint

Footprint Depth
Minimum Front-to-Back space needed for clearance of machine, in inches
30 in
Footprint Width X-Axis
Minimum Left-to-Right space needed for clearance of machine, in inches.
39 in
Footprint Height
Minimum floor-to-ceiling space for clearance of machine, in inches.
80 in
Footprint Height on PM Stand
Minimum floor-to-ceiling space for clearance of machine, WITH optional stand, in inches.
80"
All small accessories ordered with machine ship at no extra charge!

Machine ships LTL Truck Freight at a flat rate of $249 in the 48 States. Shipments to Hawaii, Alaska, Puerto Rico, or internationally need to be quoted by our Sales Team.

Shipping Crate Dimensions of this machine: 29"Wx29"Lx42"H on a 34"x34" pallet.

Flat Rate Shipping

Standard Flat Rate LTL Freight Shipping services involve a 28′-48′ tractor trailer pulling up in front of your driveway and unloading your order at the curb. This is the extent of our flat rate shipping services. Carriers will NOT back their truck up your driveway, drive their truck down a dead end street, or use their liftgate to offload your machine into the bed of your pickup or trailer. Unless you have a loading dock, forklift, material handler, or other heavy equipment with forks, you will need to add Liftgate Service for $79.

Liftgate Service (Optional)

Liftgate Delivery service will get the machine from the back of the carriers truck down to the ground and up to 25' from that offloading point, provided those 25' are paved, level, and manageable by a single person with an unpowered pallet jack. If your shop/garage threshold is more than 25' from the curb end of your driveway and you don't have your own pallet jack, you will need to add Inside Delivery Service.

You MUST have a plan for how to get your machine from the curb to your shop. If you need additional delivery services, like Inside Delivery, box truck, or flatbed with forklift delivery (available in select locations), please contact us prior to your order being shipped to allow us to arrange and charge shipping accordingly. Some, but not all carriers and locations have 26′ box trucks available, but that is not guaranteed and your delivery plan should not depend on getting a box truck.

Inside Delivery Service (Optional)

The Inside Delivery option will, in appropriate situations, cause the driver to take your freight from the offloading point at the liftgate and move it into your shop or garage, as long as the route between those two points is relatively level, paved, and manageable using a standard pallet jack. This is for flat, paved driveways that are over ~30' from the curb to the threshold of your shop/garage.

Delivery Appointment

If you need the freight carrier to call you to schedule a delivery appointment after the machine arrives at their final terminal, but before attempting delivery of your machine, you will need to request a Delivery Appointment. This is most useful if/when you need to rent a forklift or take off work. This will add 1 day to your shipping time. Scheduling a Delivery Appointment more than 2 days from the date the freight arrives at your local terminal may incur daily storages charges that the customer will be responsible for.

Click Here for PDF Manual (This manual covers PM-727M and PM-727V): PM 727MV V6 2020 10

Click here for optional PM DRO Manual (Pre 2022): PM DRO Manual 1-15-2018

Click here for optional PM DRO Manual  (New LCD Version): LCD Mill DRO V1 10 3 2023

Click Here for X Axis Table Feed Installation: Power Feed Install Bench Mill V1 4 29

Comparison Charts and other useful information:

Click Here for PM Bench Mills Comparison

Click Here for a useful document on Choosing And Using A Milling machine

FAQs

Where can I find the full list of frequently asked questions?

Please visit our Frequently Asked Questions page for a full list of common questions.