PM-1440HVT-2 14"x40" Heavy Duty Variable Speed Ultra Precision Lathe

Highlighted Features

• Variable Speed 30-2200 RPM - Comes Standard with Built in variable spindle speed via VFD drive
• This machine runs on single OR 3 phase with no modification
• Wider 9" bed
• 2" Spindle Bore
• Option of either a heavy duty welded steel base, or upgraded Solid Cast Iron Base (Choose from drop down menu when ordering, either Steel Base, or Cast Iron Base Model - Identical machine otherwise, some people just prefer the extra weight of a cast base for a slight increase in rigidity)

PM-1440HVT-2 Main Features

• Highest Quality Lathe, Made in TAIWAN
• Large 2” Spindle Bore clear through spindle for through-headstock work
• Variable Spindle Speeds – Adjust spindle speed while cutting to dial in for the perfect cutting conditions
• Shorter Spindle Length, only 17-3/8″, good for gunsmithing work
• Power feed on Carriage and Cross Slide, both left and right and in-and-out, for both turning and facing operations with automatic feed. Allows for the best surface finish in all directions.
• Induction Hardened and Precision Ground Bed Ways to resist wear and give a long service life
• All gears and shafts in headstock hardened and precision ground for long life and extremely quiet running
• FC-25 Meehanite Cast Iron used for rigidity and vibration dampening
• Removable Gap for larger diameter work
• High quality electronics used throughout machine
• Slip Clutch on feed rod, to help prevent overloading damage of feeds and allow the use of a solid micrometer carriage stop for repetitive work
• High Precision Tapered Roller Bearings used in spindle, for the ultimate in long life, high precision, and best surface finishes. Guaranteed Run Out +/- .0001″ for ultimate precision
• Inch AND Metric thread cutting ability is a standard feature True INCH PITCH main lead screw, cross feed, and compound lead screws make it easy to use for the INCH measurement System, yet still has the Metric readings on dials for the ultimate in versatility for any job that may come about
• Splash oil bath lubrication in Headstock, and Apron, for efficient lubrication, and long life, yet simple and reliable, maintenance as with oil pump lubrication systems. Also no risk of losing oil flow to expensive parts as there can be with pump lubricated systems
• Only Extremely High Precision Japanese Spindle Bearings are used, NACHI Brand at this time
• Locking Tang in tail stock
• Longest in the industry, 5 Year Warranty!

PM-1440HVT-2 Standard Accessories

(Machine runs on single or 3 phase, same model can take either input)

• Complete One Piece Base with Built In Chip Tray (Your choice of heavy duty steel, or upgrade to cast iron, please choose appropriate model)
• L.E.D. Work Light
• NACHI (Japan) Spindle bearings, with +/- .0001″ Max Spindle Runout
• D1-5 Quick Change Spindle Mount
• Back Splash Guard
• Reducing Sleeve for Headstock Center
• 4 Way Tool Post
• Headstock Dead Center
• Tail Stock Dead Center
• Thread Chasing Dial (4” Travel Thread Dial, for easier inch thread cutting)
• Feed Rod Clutch (To prevent overloading and using carriage stops)
• Everything Needed for listed Inch and Metric Thread Pitches
• Steady Rest
• Follow Rest
• Coolant System
• Foot Brake
• Belt Cover Interlock Switch
• D1-5 Face Plate (12″ Diameter)
• (6) Pcs Cast Iron Leveling Pads with Bolts
• 5 Year Warranty

Additional Specifications:

• Base Footprints: Headstock Base is 18” D x 18” W, Tailstock Base 18” D, 11” W, and 40.5″ between the bases, one solid piece

All small accessories ordered with machine ship at no extra charge!

PM-1440-HVT-2 w/Steel Base, $599 Shipping anywhere in the 48 US States. Liftgate Delivery is available, $79 and can be added at checkout. Ship weight is Approx. 1900-2000 lbs.

PM-1440-HVT-2 w/Cast Iron Base, $799 Shipping anywhere in the 48 US States. Liftgate Delivery is NOT available, this item is too heavy for liftgate delivery. (Approx 2400-2500 lbs ship weight) This one will need to be picked up at a terminal, or unloaded with a forklift by the customer at time of delivery. Shipments to Hawaii, Alaska, Puerto Rico, or internationally need to be quoted by our Sales Team.

These machines ship fully crated, and shipped on a heavy duty skid that is 78" Long x 46" Wide. This makes it easy to handle by forklift or pallet jack.

Flat Rate Shipping

Standard Flat Rate LTL Freight Shipping services involve a 28′-48′ tractor trailer pulling up in front of your driveway and unloading your order at the curb. This is the extent of our flat rate shipping services. Carriers will NOT back their truck up your driveway, drive their truck down a dead end street, or use their liftgate to offload your machine into the bed of your pickup or trailer. Unless you have a loading dock, forklift, material handler, or other heavy equipment with forks, you will need to add Liftgate Service for $79.

Liftgate Service (Optional)

Liftgate Delivery service will get the machine from the back of the carriers truck down to the ground and up to 25' from that offloading point, provided those 25' are paved, level, and manageable by a single person with an unpowered pallet jack. If your shop/garage threshold is more than 25' from the curb end of your driveway and you don't have your own pallet jack, you will need to add Inside Delivery Service.

You MUST have a plan for how to get your machine from the curb to your shop. If you need additional delivery services, like Inside Delivery, box truck, or flatbed with forklift delivery (available in select locations), please contact us prior to your order being shipped to allow us to arrange and charge shipping accordingly. Some, but not all carriers and locations have 26′ box trucks available, but that is not guaranteed and your delivery plan should not depend on getting a box truck.

Inside Delivery Service (Optional)

The Inside Delivery option will, in appropriate situations, cause the driver to take your freight from the offloading point at the liftgate and move it into your shop or garage, as long as the route between those two points is relatively level, paved, and manageable using a standard pallet jack. This is for flat, paved driveways that are over ~30' from the curb to the threshold of your shop/garage.

Delivery Appointment

If you need the freight carrier to call you to schedule a delivery appointment after the machine arrives at their final terminal, but before attempting delivery of your machine, you will need to request a Delivery Appointment. This is most useful if/when you need to rent a forklift or take off work. This will add 1 day to your shipping time. Scheduling a Delivery Appointment more than 2 days from the date the freight arrives at your local terminal may incur daily storages charges that the customer will be responsible for.

Click Here for PM-1440HVT-2 Manual and Parts List:  PM 1440HVT 2 7 24 2024 V1