Skip to content
BS-2 Full Universal Dividing Head Set, With 8" Chuck (Can Cut Spirals)

BS-2 Full Universal Dividing Head Set, With 8" Chuck (Can Cut Spirals)

$999.99 - $999.99
$999.99
$999.99 - $999.99
$999.99
  • This unit gives you the ability to machine spiral gears/shapes
  • Head tilts 10 degrees down, and 90 degrees in the vertical direction, so it can be used for any angle needed
  • Quick indexing feature, for fast indexing without dividing plates, in 15 degree increments (24 positions) makes quick work of simple tasks such as machining hex shaped bolt heads
  • (3) Dividing Plates cover almost any division imaginable
  • Hardened Worm Gear for longer life
  • Worm gear disengages for direct indexing
  • Standard 40 to 1 ratio dividing head
  • Will index all divisions from 2 to 50, and most divisions from 52 to 380
  • 8” 3 Jaw Chuck Included
  • Includes tailstock
  • Backed by a 5 year warranty
Availability:
Available on Backorder

Main Features:

  • This unit gives you the ability to machine spiral gears/shapes
  • Head tilts 10 degrees down, and 90 degrees in the vertical direction, so it can be used for any angle needed
  • Quick indexing feature, for fast indexing without dividing plates, in 15 degree increments (24 positions) makes quick work of simple tasks such as machining hex shaped bolt heads
  • (4) Dividing Plates cover almost any division imaginable
  • Hardened Worm Gear for longer life
  • Worm gear disengages for direct indexing
  • Standard 40 to 1 ratio dividing head
  • Will index all divisions from 2 to 50, and most divisions from 52 to 380
  • 8” 3 Jaw Chuck Included
  • Includes tailstock
  • Backed by a 5 year warranty

This set comes complete with everything as shown, as listed below:
12 Gears for spiral cutting feature
8" 3 Jaw Chuck, with inside and outside jaws, and chuck wrench
Adjustable Tailstock
Dividing Plates (4 plates Total)
Spindle Center
Dog Driver (For use when turning between centers)
5 YEAR Warranty against any defective parts

Main Specifications:
Center Height: 5.23"
Swing: 10-1/2"
Spindle Bore (Clear Through): 1"
Spindle Mount: 1-1/2" x 8 TPI
Spindle Taper Runout: .0006"
Gear Ratio: 40:1
Spindle Taper BS-10
Shipping weight: 148 LBS

Main Specifications

Accessory Type
General category that best fits this product
Dividing Heads
Machine Compatibility
What types of Precision Matthews machines is this accessory compatible with?
Milling Machines

Travels

Table

DRO Specifications

Power Requirements

Motor and Drive

Cutting Capacities

Unit Dimensions

Unit Length
Length of product in packaging, in inches
21.25 in
Unit Width
Width of product in packaging, in inches
18.5 in
Unit Height
Height of product in packaging, in inches
13.25 in
Unit Weight
Gross Weight of product in packaging, in lbs
217 lb

Shipping Information

Shipping Length
Length of longest dimension of shipping skid or shipping box, in inches.
34 in
Shipping Width
Width of shipping skid or 2nd longest dimension of shipping box, in inches.
34 in
Shipping Height
Height of shipment on skid, or 3rd longest dimension of shipping box, in inches.
19 in
Shipping Weight
Approximate shipping weight when crated, palletized, or boxed up and ready to ship, in lbs.
217 lb

Machine Footprint

Flat rate of $149 Shipping in the 48 US States (Ships at no extra charge if ordered and shipped with a machine, which will automatically calculate at checkout)

FAQs

Where can I find the full list of frequently asked questions?

Please visit our Frequently Asked Questions page for a full list of common questions.